The maintenance of non-standard automation equipment can help to extend the service life of non-standard equipment, and it can make the equipment more accurate. Let's take a look at the maintenance requirements of non-standard automation equipment

        First, when the machine is installed, disassembled and adjusted, it is necessary to ensure that the non-standard automation equipment is parallel to the centerline and the gear centerline for the first time, and the proper angle is suitable for the machine to effectively ensure that the machine is in operation.

        Second, our equipment should always check the maintenance and connection of each part. If there is looseness, it should be tightened. The body connecting bolts should be checked for tightness when the body is pressurized. All connecting shafts must have cotter pins and must be fully opened. Slowly smooth the main components.

        Thirdly, frequently wear-resisting parts are replaced. If there are faults, we need to troubleshoot and continue to operate. The lubrication of motor bearings should be good. Always check all wires and cables for damage. Should be timely dressing and replacement of the damaged part. Effectively extend machine maintenance.